Hot Line

The Colors steel lamellar radiators are distinguished by their versatility of use and the assortment of over 400 available models. They can therefore be used to resolve any installation requirements, also providing an appreciable saving in the choice of product in relation to the project data of the installation to be carried out. In fact, the range is divided into 3 measurements for thickness (63-80-105 mm) and six for height (250-400-500-600-800-1000 mm). The wide range of colours and the possibility of supplying curved and corner radiators enables special installations to be accomplished.

Foil radiators WSE are made in 12/10 thick steel sheet. It grants mechanical resistance and good quality during the years. The low level of water permits a very fast working and a sensitivity for the room temperature. WSE radiators are tested ono by one with a 6 bar pressure. The surfaces is finished with an high quality white painting, polyethylene packaging grants a valid protection for the item until installation.

This steel radiator is made by coupling, using technologically advanced systems, vertical tubular elements with two horizontal tubular manifolds, which take the threaded attachments for hydraulic connections to the ends. The result is a simple, linear, smooth structure, easy to install and clean, which fits in with any sort of the turnishings.

This steel radiator is made by coupling, using technologically advanced systems, vertical tubular elements with two horizontal tubular manifolds, which take the threaded attachments for hydraulic connections to the ends. The result is a simple, linear, smooth structure, easy to install and clean, which fits in with any sort of the turnishings.

TONE is a steel radiator, comprising factory-inspected tubular elements.The range of elements was designed to meet current demands in terms of size, heating power, looks and installation. Manufactured in quality steel of 1.5/1.25mm thickness, using special and versatile plants for the vast range available, TONE undergoes severe quality control as envisaged by VISION 2000 Standards; the heat exchange surfaces are perfectly smooth with rounded corners. TONE’s correct water content to heat exchange surface ratio is what makes it so versatile and ideal for all installation needs, using low temperature water to meet modern energy-saving demands now required by legislation. The distance between the vertical elements is calculated to foster heat transmission by radiation, cutting to a minimum the amount of time required to trigger air reaction, which is the aspect that creates the annoying blemishes on walls and drives the dust particles that are a source of allergies. TONE radiators are all finished with a double coat of white paint (anaphoresis + epoxy powders). The radiators are delivered each in their own cardboard and shrink-wrap nylon packaging. Heat rating is certified in compliance with Standard EN 442; construction meets the requirements of Directive 89/106/CE, Construction Materials. Maximum service pressure is 12 bar for models with 2-4 elements and 10 bar for models with 5 elements. Standard versions are fitted with 4 x ½” connections for models with maximum height over 1000mm, plumbing connections are “smaller” (fitted with spacers). Optional accessories available: wall mounting, feet, air vent valves and plugs.